LOADING...

MG MGB Roadster Mk II

MG MGB Roadster Mk II
ManufacturerMG
CountryUK
Production Started1967
Production Stopped1969
Body StyleRoadster

The MG MGB Roadster Mk II was an important development of MG’s highly successful open two-seat sports car, introduced in 1967 as an improved version of the original MGB. Retaining the attractive styling, robust 1.8-litre engine and engaging driving characteristics of its predecessor, the Mk II incorporated significant mechanical refinements, most notably a fully synchromesh four-speed gearbox, revised transmission components and improvements to the electrical system. Produced until 1969, when further revisions led to the next stage of MGB development, the Mk II represented a period of technical improvement during the model’s long production life. Its combination of traditional British sports car styling, dependable engineering and improved everyday usability helped maintain the MGB’s popularity in Britain and important export markets, particularly North America.

The origins of the MGB Roadster Mk II can be traced to the introduction of the original MGB in 1962. Developed as the successor to the MGA, the MGB represented a substantial advance in MG’s sports car engineering. Its unitary body construction replaced the separate chassis arrangement of the MGA, providing improved structural rigidity, more efficient use of interior space and a more modern manufacturing approach.

The original MGB had been designed to offer a practical and affordable sports car that combined attractive styling with dependable mechanical components. Its 1,798 cc BMC B-series engine provided useful performance, while the relatively spacious cockpit, conventional wind-up windows and folding fabric hood made it more suitable for everyday driving than earlier MG sports cars.

The MGB quickly became a commercial success, particularly in North America, where British sports cars enjoyed considerable popularity during the 1960s. However, as production continued, MG recognised opportunities to improve the transmission, electrical equipment and general refinement without substantially altering the successful basic design.

The MGB Roadster Mk II was introduced in late 1967, incorporating a series of mechanical improvements intended to enhance driving convenience and reliability. Although the exterior appearance remained largely unchanged, the revisions represented an important step in the evolution of the MGB.

The most significant improvement was the introduction of a revised four-speed manual gearbox with synchromesh on all forward gears. The original MGB had employed a transmission with synchromesh on second, third and fourth gears, while first gear remained unsynchronised.

The fully synchromesh gearbox made the car easier to drive, particularly in urban traffic and during frequent low-speed manoeuvres. Drivers could select first gear more conveniently while the vehicle was moving slowly, reducing the need for careful double-declutching techniques associated with the earlier transmission.

The revised gearbox also featured a different casing and internal arrangement, designed to improve durability and accommodate the new synchronising mechanism. Although the transmission retained the traditional direct mechanical feel of the MGB, the improvements contributed to smoother and more convenient operation.

An optional overdrive transmission remained available, allowing reduced engine speeds during sustained cruising. The Mk II employed a different overdrive arrangement from earlier cars, with a Laycock Type LH unit becoming associated with the revised gearbox. This provided a useful additional ratio for motorway driving and longer-distance touring.

The MGB Roadster Mk II retained the established 1,798 cc BMC B-series inline four-cylinder engine. The engine featured a cast-iron cylinder block and cylinder head, with overhead valves operated by pushrods. Twin SU carburettors provided fuel delivery on most British-market examples, contributing to responsive throttle characteristics and respectable performance.

In its original specification, the MGB engine developed approximately 95 bhp at 5,400 rpm, with maximum torque of around 110 lb ft (149 Nm) at 3,000 rpm. These figures provided a useful balance between performance and everyday flexibility, making the MGB suitable for both enthusiastic driving and longer-distance touring.

The B-series engine was already well established within the British Motor Corporation and had earned a reputation for durability and straightforward maintenance. Its robust construction and relatively simple overhead-valve arrangement made it particularly suitable for a sports car intended for regular road use rather than exclusively for competition.

The engine’s relatively strong mid-range torque allowed the MGB to accelerate smoothly without requiring constant gear changes. This characteristic distinguished it from smaller-capacity sports cars that relied more heavily on high engine speeds to deliver their performance.

The MGB Roadster Mk II was capable of reaching approximately 103 mph (166 km/h), depending on specification and road conditions. Acceleration from 0 to 60 mph generally required around 11 to 12 seconds, making it a competitive affordable sports car during the late 1960s.

The Mk II retained the unitary steel body structure introduced with the original MGB. This construction eliminated the need for a separate chassis and allowed the passenger compartment to be positioned more efficiently within the vehicle.

The body featured a long bonnet, short rear deck and integrated front wings, creating an attractive and balanced design. The front end incorporated recessed headlamps and a distinctive chrome radiator grille, while the rear featured compact tail lamps and a relatively short boot lid.

The MGB Roadster Mk II retained the traditional open two-seat configuration, with a folding fabric hood and conventional wind-up side windows. These features provided better weather protection and greater everyday practicality than the removable side screens used on the earlier MGA.

The body was constructed primarily from steel panels welded into a unitary structure, providing adequate rigidity while maintaining relatively compact external dimensions. The MGB’s wheelbase measured approximately 2,312 mm, while overall length was around 3,886 mm in chrome-bumper specification.

The suspension arrangement remained largely unchanged from the original MGB. At the front, independent suspension employed coil springs and wishbones, with lever-arm hydraulic shock absorbers forming part of the upper suspension arrangement.

At the rear, the car retained a conventional live axle supported by semi-elliptic leaf springs, with lever-arm hydraulic shock absorbers controlling suspension movement. Although relatively simple, this arrangement provided predictable handling and reasonable ride comfort for a lightweight sports car.

Rack-and-pinion steering was retained, offering direct and responsive control. Combined with the relatively low seating position and balanced chassis, this gave the MGB Roadster Mk II an engaging driving character that appealed to enthusiasts.

The braking system employed front disc brakes and rear drums, providing effective stopping performance for the car’s weight and engine output. The front disc brakes offered improved resistance to brake fade compared with the all-drum arrangements used on earlier MG sports cars.

The MGB Roadster Mk II was initially offered with steel disc wheels as standard, while traditional centre-lock wire wheels were available as an option. Wire wheels remained popular among enthusiasts because of their classic sporting appearance and association with earlier MG models.

The Mk II also introduced changes to the rear axle and transmission arrangements. The stronger Salisbury-type rear axle, previously associated with certain MGB variants, became standard on the Roadster, replacing the earlier banjo-type axle.

This change improved durability and simplified parts commonality across the MGB range. The revised rear axle was well suited to the engine’s torque output and contributed to the car’s reputation for robust mechanical engineering.

Electrical improvements formed another important part of the Mk II development programme. The earlier dynamo charging system was replaced by an alternator, providing improved electrical output and more reliable battery charging, particularly when additional electrical equipment was being used.

The revised electrical system also incorporated changes to the wiring arrangements and associated components. These improvements reflected the increasing demands placed on vehicle electrical systems during the late 1960s.

Inside, the MGB Roadster Mk II retained the relatively spacious and practical cockpit introduced with the original MGB. Two individual seats provided accommodation for the driver and passenger, while the dashboard incorporated a large speedometer, tachometer and supplementary instruments.

The original British-market dashboard retained its traditional painted metal appearance, although interior specifications varied according to market requirements. North American models increasingly incorporated additional safety equipment, reflecting changing regulations and customer expectations.

The large steering wheel and floor-mounted gear lever reinforced the traditional MG driving environment, while the low seating position placed the occupants close to the road. The relatively compact cockpit provided an engaging driving experience without being excessively cramped.

The MGB’s conventional wind-up windows represented a significant improvement over the removable side screens used on earlier MG sports cars. Combined with the folding fabric hood, they provided better weather protection and made the car more suitable for everyday driving.

The boot offered useful luggage accommodation for a compact sports car, while the relatively economical engine and optional overdrive transmission made the MGB suitable for longer-distance touring.

The MGB Roadster Mk II’s driving experience was characterised by responsive steering, predictable handling and strong mid-range engine torque. The fully synchromesh gearbox made the car more convenient to drive, particularly in traffic, while the revised transmission and electrical systems improved general usability.

The car was particularly enjoyable on winding country roads, where its relatively compact dimensions and direct controls encouraged smooth driving. The suspension provided a reasonable compromise between ride comfort and sporting handling, although the live rear axle could become unsettled on rough surfaces.

The MGB Roadster Mk II competed in a growing market for affordable British sports cars, alongside models such as the Triumph TR4A, Triumph TR5 and various European sporting roadsters. Although some competitors offered greater engine capacity or outright performance, the MGB distinguished itself through its attractive styling, manageable dimensions and relatively economical operation.

North America remained the model’s most important export market. American buyers appreciated the MGB’s traditional British sporting character, attractive bodywork and relatively affordable purchase price. The improved transmission and electrical equipment of the Mk II helped maintain its appeal in an increasingly competitive market.

The MGB Roadster Mk II also benefited from the sporting reputation established by MG’s competition activities. Modified MGBs appeared in club racing, rallies, endurance events and hill climbs, while factory-supported competition cars achieved notable results in international motorsport.

The MGB competed in events such as the 24 Hours of Le Mans, the Monte Carlo Rally and the Sebring endurance races, demonstrating the durability and sporting potential of the basic design.

Although the Mk II was primarily intended as a road car, its robust mechanical construction and balanced handling made it suitable for amateur competition. The B-series engine offered considerable scope for performance modifications, including improved carburation, revised camshafts, cylinder-head work and exhaust systems.

The availability of competition components and specialist knowledge encouraged enthusiasts to develop the MGB for a wide range of sporting activities. The car’s relatively straightforward mechanical engineering also made it attractive to private competitors who wanted a dependable and affordable sports car.

Production of the MGB Roadster Mk II continued until 1969, when further revisions to styling, interior equipment and mechanical specifications marked the next stage of MGB development. The MGB itself remained in production until 1980, demonstrating the strength and adaptability of the original design.

The Mk II formed an important part of the MGB’s long production history, helping establish the mechanical specification that would continue through much of the model’s later life. Its fully synchromesh gearbox, revised rear axle and alternator charging system represented practical improvements that enhanced everyday usability without sacrificing the traditional MG driving experience.

Today, the MG MGB Roadster Mk II is regarded as one of the most desirable versions of the chrome-bumper MGB range. Its combination of classic styling, improved transmission and relatively straightforward mechanical engineering makes it particularly appealing to enthusiasts seeking a traditional British sports car suitable for regular use.

Restoration requires careful inspection of the unitary body structure, particularly the sills, floor panels, wheel arches, door pillars and suspension mounting areas. Corrosion can affect the structural integrity of the body, and extensive repairs may be required on neglected examples.

The B-series engine is generally robust and benefits from extensive specialist knowledge and good parts availability. The gearbox, rear axle, suspension and braking system are also relatively straightforward to maintain, although careful inspection is essential when assessing a vehicle that has been unused for an extended period.

The availability of replacement parts and specialist support remains one of the MGB’s greatest advantages. Numerous suppliers continue to provide mechanical components, body panels, interior trim and weather equipment, allowing surviving cars to be maintained and restored to a high standard.

The MG MGB Roadster Mk II represents an important stage in the evolution of one of Britain’s most successful sports cars. By combining the established MGB design with a fully synchromesh gearbox, improved electrical equipment and revised transmission components, MG created a more refined and practical Roadster while preserving the attractive styling and engaging driving characteristics that had made the original model so popular. Its place within the chrome-bumper MGB range and its enduring appeal among enthusiasts ensure its significance in the history of the MG marque.

Vehicle

Number of Doors2
Number of Seats2

Engine

Engine ManufacturerMG
EngineInline 4
Engine LocationFront
Engine Displacement1798 cc
ValvetrainOHV
Valves per Cylinder2
Bore80.3 mm
Stroke88.9 mm
Compression Ratio8.8
Cooling SystemWater
Fuel TypePetrol
Fuel SystemCarburator, 2 x SU
AspirationNormal

Performance

Top Speed106 mph
Acceleration (0-60mph)11.8 s
Power71 / 96 / 95 at 5400 rpm
Torque150 / 111 at 3000 rpm

Steering, Transmission & Suspension

DrivetrainRear
TransmissionM4

Dimensions

Weight970 kg
Length3891 mm
Width1523 mm
Height1254 mm
Wheelbase2311 mm